Product Description
Menzerna Heavy Cut Compound 1000
Directions:
- Ensure area to be corrected is clean, dry & cool to the touch
- Use a hard compounding pad
- Apply 1-2 pea-sized drops to the pad
- Place pad against the paintwork & use a lower speed to spread product
- Increase speed to 3-4 & work product until only a film remains
- Wipe residue using a clean, soft microfibre
Features:
- Fast removal of sanding marks
- Even sanding pattern
- High productivity
- No dust formation
Cut: 9/10
Gloss: 3/10
Menzerna Medium Cut Polish 2500
This polish contains diminishing abrasives and is also well lubricated so it can work for longer ensuring the abrasives can break down fully to remove paintwork blemishes, sanding marks and micro marring even on delicate paints.
Menzerna Medium Cut Polish 2500 is often used as a one-step correctional polish. It can remove surface imperfections, whilst at the same time leaving industry leading levels of shine and gloss.
Features:
- Water based
- Suitable for use with DA, rotary or by hand
- Suitable for all types of paint finish
- Contains diminishing abrasive particles
- Free of silicones and fillers
Cut: 5/10
Gloss: 7/10
Menzerna Super Finish 3500
This polish uses powder-fine abrasives that get rid of fine swirls, polishing marks, micro-scratches and holograms.
Menzerna claim that the abrasives are the smallest and most uniform in the world, these particles have a sharp edge that can cut ceramic clear coats as well as the more conventional clear coats.
As well as being able to remove light imperfections, Super Finish 3500 also leaves the most reflective and glossy surface imaginable.
Menzerna developed this polish to tackle fine surface scratches in the Maybach and Rolls Royce Phantom and other ceramic finishes. It is however becoming widely adopted as the new standard in finishing polishes.
Features:
- Water based
- Suitable for use with DA, rotary or by hand
- Suitable for all types of paint finish
- Contains diminishing abrasive particles
- Free of silicones and fillers
Directions:
- Ensure surface is clean, dry & cool to the touch
- Apply 2-3 pea sized amounts to a medium/light polishing pad
- Place pad against paintwork & work at low speeds to spread compound
- Work abrasives at medium speed (4-5 with a DA, 2-3 with a rotary)
- Wipe residue with soft, microfibre towel
- Finish can be checked using Menzerna Control Cleaner to ensure all residue is removed
Cut: 3/10
Gloss: 10/10
